Combine comfort and modernity thanks to the Woodline accordion bay. Its profiles are made of quality glued laminated wood. A specific angle connection of the leaves provides the system with additional stability. The frame consists of an aluminum construction which is fully covered inside and out with solid wood moldings.
The construction depth is 86 mm. The narrow apparent width of the 143 mm profile in the butt of the leaf provides maximum transparency even when the opening is closed. For a perfect harmony with nature.
The Combiline accordion bay guarantees maximum weather resistance thanks to its wooden / aluminum profiles. This system also has a construction depth of 86 mm in the leaf profile while an angular aluminum cover is applied on the outside on the wooden profile. The frame consists of an aluminum construction, the inner side of the frame of which is covered with solid wood moldings. The sealing is done on two levels all around, an optimal drainage of the system being thus guaranteed. 147 mm profile width.
WOODLINE AND COMBILINE PROFILE SYSTEM
- Wooden window systems with thermal insulation with construction depth of 86 mm in the sash profile
- Height up to 2800mm
- Quality multi-glued laminated plywood in selected quarters/half-quarters
- At the bottom, low absorption of the load required in the event of a fall
- Angular wooden leaf frame profiles (R2) marked
- Multifunctional one-piece bionicTURTLE® insulating core embedded by adhesion in the wooden leaf
- The leaves are manufactured with a mechanically blocked corner connection. A rounded tenon fits exactly into the oblong hole of the pendant and an additional screw fixing reinforces the robustness of the connection between the leaves
- Controlled drainage
- Running and guide rails are integrated into the system
- Separate running and guide rails
- Threshold rail also barrier-free and suitable for the available habitat
- Concealed wiring that can be integrated
WOODLINE SPECIAL FEATURES
- The frame consists of a statically loaded aluminum construction (angled joint) which is completely covered inside and out with solid wood moldings
- Small apparent width of 143 mm in the leaf abutment
COMBILINE SPECIAL FEATURES
- An angular aluminum coating is applied externally to the wooden leaf. The frame consists of a statically loaded aluminum construction (angled joint) whose inner side of the frame is covered with solid wood moldings
- Small apparent width of 147 mm in the leaf abutment
SEALING SYSTEM
- The sealing is done on two levels all around, with constant spacing and sealing pressure between the leaves
- Sealing levels are not interrupted by fittings
- Coated foam seals with the best sliding characteristics
CONFIGURATION VARIANTS
- Foldable leaves either inwards or outwards, available to the left or right
- Double leaves sliding from left to right also possible
- Threshold rail variants without stop according to DIN 18040 “Barrier-free construction”
- Threshold rail without height difference as minimum possible threshold rail
HARDWARE
- No protruding running and guide rails
- Fittings located in the insulating core integrated into the plywood with hand control
- For higher wind loads, the concealed TwinX® leaf centering can also be integrated
- System hinges also for heavy door leaves
- Installation adjustment integrated into the frame fold outside the insulation layers
- The shape-optimized stainless steel running rail with adjusted running roller allows for a guideless trolley
- Stainless steel ball bearing system: Quiet and extremely durable stainless steel roller and bearing surface
- Maneuverable and low-wear carriage with double-groove ball bearings and integrated anti-hinging device
- Sliding locking system or optional locking sash to control ventilation
- High-quality Solarlux designer handles made of stainless steel
- Lockable one-handed operation with special drives with 24 mm travel
- Passage leaf with multi-point locking and profile cylinder available
- Secure hinge pin
- “Easy Clean” safety cleaning fitting with convenient release and lock to prevent misoperation for cleaning the exterior parts of the leaf on inward-opening glass concertina partition elements
- The defined locking points allow the use of this cleaning fitting for single as well as double glass accordion partitions
- Lock monitoring with reed contacts and concealed wiring
- Patented “Comfort Snap” leaf clamp
- Fixing the frame profiles and threshold rail above the load-resistant mounting plates with optional centering grooves and seals
- Additional covering of the fixing screws in the frame edge
ENVIRONMENT
- Resource-efficient manufacturing
- FSC® (Forest Stewardship Council), COC (Chain-of-Custody)
- PEFC (Program for the Endorsement of Forest Certification Schemes)
- Certified disposal according to DIN EN ISO 14001:2009
ENTREPRISE
- Factory production controls
- Tested according to DIN EN 1090 performance class EXC 1 and EXC 2, certified according to DIN ISO 9001
