The SRD light pipe consists of a dome, 3 pieces of SRM rigid tube of 61cm, an elbow for SRK rigid tube (except diameter 550), a ceiling frame, a prismatic diffuser and an assembly kit.
The total length of all the elements of a rigid tube connected in a straight line is 2,1 m. The rigid aluminum pipe (thickness 0,5 mm) is covered by a reflective silver coating which reflects 98% of the light (the inside of a tube looks like a mirror).
The construction of a reflective tube guarantees more light in the room. The SRD skylight can be used in any type of building, but with regard to minimum light loss, it is recommended for buildings in which natural light is transmitted to distant distances up to 12m.
The skylight can also be used in the evenings and during the night thanks to the lighting system installed at the end of the well which acts as a lamp.
Light pipe consists of a dome, a connection, a reflective rigid tube, an elbow, a prismatic and transparent diffuser and a ceiling frame
The reflective layer (based on silver) used in the manufacture of the elements of the skylight which conducts light inside the building has one of the most important reflection coefficients which is 98%
Maximum length of the skylight of 250 mm and 350 mm in diameter can be 1200 cm or even more (above 400 cm additional extensions must be used)
Specially designed connections guarantee a perfect seal and ease of assembly
Duct to be installed in roofs with a slope between 15 ° and 60 °
Connections available for flat and corrugated roofs