- All types of structures: individual and collective housing, non-residential buildings
- All seismic zones in metropolitan France and categories of importance of buildings
- All floor levels
- Placed with or without shoring device (according to floor study)
- Available in the IMPAKT range version with a reduced carbon impact
- Thin prefabricated slab (5 cm minimum) allowing the construction of solid concrete floors
- Available in different thicknesses and dimensions, it is made to measure for your site.
- Incorporates lifting loops and on request, reservations, electric pots, hangers, KoffraRive and guardrail reception device (DAK Prédalle)
- Integrates the lower reinforcements of the floor by combining it with a compression slab poured on site (integrated formwork)
Adapts to your building
- KP1 pre-slabs are manufactured specifically for your site, to the exact dimensions you need.
- Pre-slabs KP1 adapt to oblique or rounded areas.
Up to 7 m span in thickness. 20:
- The optimized industrial design of the KP1 pre-slabs allows them to span large spans.
- Compared to a traditional floor, with an equivalent thickness you will cross a greater span, or with an equal span, the floor will be less thick.
Surface ready for finishing work:
- Factory prefabricated elements on decks
- Specific, the KP1 pre-slabs have a smooth and neat underside ready to receive the finishing work.
- The joints between Pre-slabs can be treated as soon as the floor is stripped with the appropriate joint product.
Length : 120 cm
Thickness : 13cm; 16cm
Width: : 60 cm
Accessories : end spandrels, corners and anti-lifting clips.
Technical evaluation : Technical Notice (ATEc) - n° 3/03-405 issued by the Cstb
Implementation : installation of interjoists resting on beams then pouring of a floating slab.
Thermal transmittance (U) : 2,63 W/m².K (Up).
Weight 2,2 kg
Work family : Collective housing, individual house.
