This draining floor covering is a solution for the management of your urban water. It is permeable and therefore lets rainwater pass near its point of impact which prevents the formation of puddles, gullying or foam.
It does not require a drainage system, slope and water treatment because it returns directly into the ground to infiltrate to the groundwater.
It can be maintained by a wet sweep or high pressure jet.
Its vacuum rate of 30% allows it to limit the risks of clogging and damage in the event of freeze / thaw.
Its aesthetic, non-slip and draining qualities make it perfect for:
The forecourt, esplanades, sidewalks, swimming pool beaches, parking lots, disabled access, pedestrian walkways, terrace roofs, cycle paths, etc.
Composition: Natural aggregates and polymeric binder
Substrates: Grave stones, new concrete, old concrete, sand, tiles, pavers (Under conditions during site visit)
Drive-over: Yes up to 26t
Infiltration capacity: 1l / m² / s
Coating thickness: 2 to 5 cm depending on support and use
Thickness of foundations: Variable depending on support and use
Colors: 13 colors of natural aggregates
Others: Application technique in accordance with a DTU
Setback: 15 years of experience, 4.000.000 m² installed