Transyl is an excellent multifunction lubricant-remover whose formula was developed over 75 years ago to meet the needs of the automotive industry. Since then, it has been widely and successfully used in the building industry, the aeronautical, maritime, railway, but also textile, watchmaking ... industries.
2019, not a single wrinkle, a new enriched formula and Transyl® continues to loosen everything with your fingertips, to protect the most subtle mechanisms with unequaled effectiveness.
The Transyl® was born with the founder of the Durieu company when the latter developed a penetrating oil finally capable of truly penetrating and lubricating. Since then, he has never ceased to foil seized mechanisms, to lubricate and protect all the cogs, industrial parts of the automobile, or of the navy, passing through looms without forgetting the protective cocoon offered to the tools of garden or the protection of all cycles subject to bad weather and external corrosion.
The Transyl® has become obvious, a legend in itself.
Transyl®: more than a product, a reflex!
Because today, everyone - professional or individual - relies on the longevity of the materials and the efficiency of maintenance whether it is a wall light mottled in a flea market, an old rusty grid of holiday home or the metal frame of an industrial building… And with Rustol-Owatrol® it is like the insurance of a luxury product… in the field of rustproofing! Infallible, impeccable, it does not disappoint ...
Its success is due to the mix of cutting-edge technology combined with ultra-simple use.
Explanations
- Its main strength lies in its concentration of dry extracts. The high rate of dry extracts and their qualities give distinct advantages to Transyl® and guarantee its timeless effectiveness.
- Its very precise formulation and its ultra qualitative specifications give it exceptional penetration and self-spreading qualities to work on all supports.
- Its composition also allows it to protect all the mechanisms it unlocks against corrosion, which makes it essential in all areas of industry.
Transyl®: how does it work?
- Without doing anything, thanks to its wetting power and its self-spreading qualities, Transyl®, with a simple spraying, dissolves grease, sludge and residues. Like a master key, thanks to its great fluidity, it infiltrates the most difficult places to access to break up the rust and lubricate the entire support.
The secret boot
- Not aggressive towards supports: Transyl® acts by cold infiltration and does not contain any corrosive substance. This is why it does not dry out and does not damage the parts and mechanisms to which it is applied regularly.
- Once on the support, it creates a barrier against oxidation: it expels moisture and deposits a greasy film in all microporosities. The mechanisms are protected to last.
Transyl® new formula: always the same qualities… reinforced!
- With the new formulation, the water is removed at 150% from the support, leaving the parts completely free of all traces of moisture. Coupled with anti-corrosion additives, the protection obtained is even more effective against corrosion, especially in humid industrial environments (marine, etc.).
- The lubricating power is accentuated thanks to the reinforced rate of dry extracts which further improves the penetration and self-rising performance: the Transyl® infiltrates absolutely everywhere, nothing escapes it!
- Thanks to its very low viscosity, Transyl® allows particles and dust not to agglomerate on the treated parts.
Most: a new smell that does not bother the user.
- Transy® new formula, 3 words: performance, protection, duration is absolute efficiency!
