Contact the manufacturerYou have a project ?
Request A Quote
More images SeeHide
Description See +Hide
Electromagnetic polarity reversal system against humidity in walls IPE STOP ONE | Quick and easy installation.
We present our solution to fight against humidity in walls: the IPE STOP ONE electromagnetic polarity inverter system. This product is designed to dry out the walls of houses built before 1960, using a white drying unit. Our solution is easy to install, without requiring any work, and it is delivered quickly and free of charge. In addition, our Made in France product is guaranteed. You can now discover this system in our online store, where several powers are available. Do not hesitate to opt for our effective and practical solution to fight against the humidity of the walls.
We offer you an electromagnetic polarity inverter box to combat humidity, our IPE STOP ONE product, entirely made in France and guaranteed. This product is easy to install yourself, with quick and simple installation. It effectively treats wall dampness, which is often caused by capillary rise due to ground moisture rising up the walls.
The electronic dewatering plant generates a contrary electric current in the wall, thus reversing the polarity of the electromagnetic fields and driving the water towards the ground. This solution is effective in drying out damp walls and preventing damp problems. It is also suitable for old or fragile walls.
Drying out walls requires no drilling or vibration, which prevents damage to walls. Also, it dries out faster because this solution directly addresses the cause of the problem. It takes between 12 and 24 months for the drying to be complete, depending on the specifics of the building and the follow-up of the recommendations.
By reinforcing the natural insulating power of the wall, this solution makes it possible to reduce heating consumption, because the walls will be less humid. Finally, our electronic drying unit produces no noise or harmful waves, and it consumes very little electricity.
Compliant with Directive 2014/35/EU on low voltage
Complies with Directive 2014/30/EU on electromagnetic compatibility (EMC)
Not harmful to electromagnetic waves (EMF)
Compliant with Directive 2011/65/EU on the Restriction of Hazardous Substances (RoHS)
Complies with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)
Radical and definitive solution to treat humidity problems at their source.
Effective and rapid results: capillary rise is eliminated in 12 to 24 months (depending on the characteristics of the building and the follow-up of recommendations*).
Reduced heating costs (damp rooms consume more energy).
10 year manufacturer warranty.
No harm to the health of people, animals and plants (the product has been tested by the Emitech laboratory).
Low power consumption.
Easy installation, without works, without noise and without dust (telephone assistance available).
Range of action from 30m² to several hundred square meters depending on the model chosen.
Minimal bulk: simple box plugged into a power outlet.
Safety: the emission of waves does not exceed that of common household appliances (washing machine, hair dryer, refrigerator, electric oven or microwave).
Dimensions: 322 232 x x 32mm
Warranty: 10 years manufacturer.
What is our IPE STOP ONE electromagnetic polarity inverter used for?
Our STOP-ONE electromagnetic polarity inverter is the solution to dealing with humidity problems in your home by lowering capillary rise and drying out the walls.
How does our IPE STOP ONE electromagnetic polarity inverter work?
Our STOP-ONE electromagnetic polarity inverter diffuses a very low frequency electromagnetic field which changes the orientation of water molecules. These molecules then fall back into the foundations by gravity, carrying with them some of the salts responsible for efflorescence and damp spots. Then, the drying of the walls takes place by natural evaporation of the humidity.
It can be easily placed or fixed in the wet area without intervention on the masonry.
Result: your walls will be dry in 18 to 24 months (depending on the characteristics of the building and the follow-up of the recommendations*).
To install the IPE STOP ONE electromagnetic polarity inverter, it is essential to place it at least 1,50 meters from any electrical or electronic device. The location must be at a minimum height of 25 cm and not exceed 1 meter from the ground. Once hung on the wall like a painting, the device must not be moved and must be installed directly on a load-bearing wall or shear wall, without ever placing it on a plasterboard lining. To determine whether the effective diameter of a STOP ONE covers the whole building, the dimensions of the dwelling, in particular the largest diagonal, must be taken into account. The STOP-ONE electromagnetic polarity inverter must be permanently connected, but its power consumption is very low, ie 0,75 W, resulting in a cost of approximately €15 per year.
With regard to the stripping of coatings or film-forming coatings, it is recommended to remove them from the lower part of the walls to a height of about 10 cm above the degradation fringe to allow the walls to breathe.
The ventilation of the dwelling is essential to obtain good air circulation, because the drying of the walls is done partly by evaporation. It is therefore crucial to have adequate ventilation in the dwelling and to check that the doors and windows comply with the standards in terms of undercutting (the doors must be undercut to a minimum of 1,5 cm in dry rooms and 2 cm in damp rooms). Installing window vents is also recommended.
Once the walls are dry, the moisture-hungry hygroscopic salts migrate to the surfaces. It is then essential to brush to remove most of these salts. To obtain perfect drying of the walls, it is important that they are dry and sound, and that no mineral salt rises in the coatings. We therefore recommend that you redo the lime facade plasters with an adjuvant against hygroscopic salts.
In the event of lateral infiltration, the installation of a drain is recommended. The latter makes it possible to collect underground water and evacuate it before it reaches the foundations.
It is important to note that this process does not treat infiltration, flooding problems and mold in the house, which will have to be treated separately.
General documentation SeeHide
IPG polarity inverter against humidityPDF 2.46MBConsult
IPE polarity inverter against humidityPDF 1.99MBConsult
ATE anti-scale and anti-limescale devicePDF 1.62MBConsult
CP HUMIDISTOP FRANCEPDF 2.19MBConsult
Technical documentation SeeHide
documentation IPE STOP ONE against humidityPDF 1.99MBConsult
documentation IPG GEOSTOP against humidityPDF 2.46MBConsult
ATE anti-limescale and anti-scale devicePDF 1.62MBConsult
Moisture by capillarity 🏠💦 What is it and how to eliminate it without work - HumidistopVideoConsult
The manufacture of devices against damp walls: Dive behind the scenes of the factoryVideoConsult
How to protect yourself from electromagnetic waves? Discover our Wavy Box and Wavy Plate devicesVideoConsult
HUMIDISTOP: “SOFT WAVE” TECHNOLOGY TO FIGHT AGAINST ELECTROMAGNETIC WAVESVideoConsult
TV - Our devices for drying walls against humidity in the meeting place for innovation.VideoConsult
Humidistop: the success of a "Made in France" model based on polarity invertersVideoConsult
Humidistop: Made In France innovation to fight against humidity - Guillaume DurandVideoConsult
Do you want to know what is the best solution to treat the humidity in your walls?VideoConsult
An innovative trick to remove humidity from your home! IPG GEOSTOP and IPE STOP ONEVideoConsult
Humidistop, designer and manufacturer of French devices against humidity, limestone and wavesVideoConsult
Price of polarity inverters against humidity IPE STOP ONE and IPG GEOSTOPVideoConsult
Geomagnetic polarity inverter IPG GEOSTOP and electromagnetic IPE STOP ONE against humidity.VideoConsult
Humidistop: innovative and French solutions against humidityVideoConsult
IPE STOP ONE and IPG GEOSTOP polarity inverter, how are they made?VideoConsult
How are the IPE STOP ONE and IPG GEOSTOP polarity inverters made?VideoConsult
How are IPE STOP ONE and IPG GEOSTOP humidity switches made?VideoConsult
The difference between our devices against humidity IPG GEOSTOP and IPE STOP ONE | Price | NewsVideoConsult
How to detect and treat moisture problems in the walls, floors in his house? C8VideoConsult
How to install your own polarity inverter or IPE electromagnetic drying unitVideoConsult
How to install your own polarity inverter or IPG geomagnetic drying unitVideoConsult
Web link SeeHide
- #IPE STOP ONE
- #IPG GEOSTOP