Mineralspray® is a water-based glue, with High Environmental Qualities, used to freeze aggregates and mineral mulches
Composed of an organo-mineral binder with High Environmental Qualities.
Maintenance solution for freezing aggregates around green spaces, trees or at the base of buildings.
These are often spread by bad weather, wind, animals or even maintenance by leaf blowers.
DOSAGE AND USE
Product composition: Mixture of minerals and water
Product ready to use.
0,3 liters / m² to obtain a surface area of 15 m² with a 5 liter container.
Pour the product into your sprayer or watering can and apply to the affected area.
Leave to dry for approximately 24 hours to obtain the expected result.
May turn yellow in case of overdose.
Mineralspray® is a maintenance product. It can be applied 1 to 2 times a year depending on the desired result.
Available in 5L and 20L
CONDITION OF APPLICATION
To be used in weather favorable for drying.
Indeed, this product is water-based. The use of the latter must be carried out in weather favorable to the evaporation of water.
It will therefore be necessary to be at least 15°C with sunny weather and no precipitation for 24 hours.
For use on shavings, be sure to use it at temperatures above 20°C in sunny weather so that drying can take place before absorption.
Be careful not to walk on the area during the drying phase.
ADVANTAGES
• Gravel glue
• Helps keep aggregates and chips in place when using the leaf blower and during bad weather
• Solution to reduce the number of maintenance and cleaning interventions
• Easy to use
• Based on a solvent-free binder, in aqueous phase
• Maintains the drainability of the treated space
• Do It Yourself: Use Mineralspray® to freeze colored granulates to create patterns, decorative spaces, etc.
