Contact the manufacturerYou have a project ?
Request A Quote
More images SeeHide
Description See +Hide
MEGALINE is an aluminum accordion bay window perfectly adapted to current requirements in terms of architectural design and lifestyle favoring clear glazing, durability and everyday comfort. The quality of the components used allows it to be adapted to the most varied projects.
Accordion berries: higher than ever
From standard to the most daring, MEGALINE meets dimensions that can reach up to 4,50m in height and 1,50m in width, with a glazing weight recovery of up to 150kg per leaf. Each profile, each accessory has been scrupulously designed and selected to offer a high-end service identical to that which characterizes the other ready-to-install joinery in the SOLARLUX range.
A sophisticated technique from a glazing specialist
Thus, the principle of sliding of the leaves is done using a stainless steel running rail specially designed for the use of trolleys without guidance. For optimal comfort of passage between the interior and exterior, MEGALINE offers a low flush transom option without physical obstacles perfectly suited to people with reduced mobility. Finally, it can be equipped with a lockable leaf with the possibility of invisible connection to any home protection system, thus promoting the ventilation of living spaces in complete safety. Benefiting from the expertise developed and widely tested in northern Europe by SOLARLUX in terms of thermal performance, MEGALINE is equipped with the multifunctional “bionicTURTLE®” monobloc core which contributes to obtaining a Uw of up to 0,9 .2 W/mXNUMXK. Like the entire offer
offered by SOLARLUX MEGALINE is a unique solution on the market which is positioned as a complementary offer for all professionals working in the residential sector.
Features SeeHide
PROFILE SYSTEM
- Modular and thermally insulated aluminum profile system with a construction depth of 84 mm
- Angular profiling
- Exposed width 132,5 mm in the sash abutment, depending on static requirements, eg extreme wind loads, static profiles can be added in the sash abutment area. This results in an apparent width of 129 mm in the butt of the leaf
- One-piece multifunctional “bionicTURTLE®” insulating core in glass fiber reinforced polyamide
- Light shear adhesion built into the insulation strip to compensate for thermal loads
- Sashes are robustly mitred together using internal corner joints, glued and pressed
- Controlled drainage
- Running and guide rails are integrated into the system
- Separate rolling and locking level
- Threshold rail (barrier-free and usable in living areas) available
- Concealed wiring that can be integrated
WATERPROOFING SYSTEM
- Sealing is done on two levels all around, with constant gaps and sealing pressure between the leaves
- Sealing levels are not interrupted by fittings
- Coated foam seals with the best sliding characteristics
- Gasket aimed at interrupting thermal convection to obtain better thermal insulation values available as an option
- Up to three levels of tightness possible
CONFIGURATION VARIANTS
- Folding leaves optionally inwards or outwards, can be made to the left or to the right
- Threshold track variants without stop according to DIN 18040 "Accessible building construction"
- Threshold rail without height offset as minimum possible threshold rail
HARDWARE
- No protruding running and guide rails
- Fittings in profiles with one-hand operation
- In case of higher wind load, possibility of additionally integrating the concealed sash centering "TwinX"
- System hinges also for heavy door leaves
- Installation adjustment integrated in the frame fold, outside the insulation layers
- Shape-optimized stainless steel running track with adjusted running wheel results in a guideless carriage
- Stainless steel ball bearing system: Quiet and extremely durable stainless steel roller and running surface
- Maneuverable and low-wear carriage with double-groove ball bearings and integrated anti-hinging device
- Sliding locking system or optional locking sash to control ventilation
- High-quality Solarlux design handles made of stainless steel
- Lockable one-handed operation with special drives with 24 mm anchor
- Passage sash with multi-point lever handle locking and profile cylinder possible
- Secure hinge pin
- Interlock monitoring with reed contacts and concealed wiring
- Attachment of frame and sill profiles above load-resistant mounting plates with optional centering grooves and gaskets
- Additional coating of the fixing screws in the frame crease
ENVIRONMENT
- Resource-efficient manufacturing
- Disposal certified according to DIN EN ISO 14001:2009
ENTREPRISE
- Factory production controls
- Tested according to DIN EN 1090 Execution class EXC 1 and EXC 2
- Certified according to DIN ISO 9001
General documentation SeeHide
Technical documentation SeeHide
Web link SeeHide
- #LargeOpening
- #Aluminum
- #Wood
- #Tailored
- #AccordionBay
- #Design