AIRWOOD, when wood energy becomes the main heating source of the house

How does the AIRWOOD system work?

The entire AIRWOOOD range works around exchanger duct, in which the sampled air will heat up before being homogeneously redistributed in the other rooms of the house, and BOOSTY, a back-up system that complements or takes over from wood heating (optional with Sunwood and Confort +).

The exchanger duct integrates perfectly with Poujoulat Chimneys systems. It comes in place of part of the flue. A unique and innovative device.

The benefits of AIRWOOD

• Comfort: the whole house benefits from the wood heat
• Energy savings : calories usually lost are recovered and used (up to 25% energy savings)
• Valuation: the installation of AIRWOOD optimizes the heating installation and enhances the habitat sustainably

3 AIRWOOD solutions for all projects

AIRWOOD Confort +, for all types of wood-burning appliances

AIRWOOD Confort + is compatible with a closed hearth, a wood stove or a pellet stove. It allows a homogeneous distribution of wood heat throughout the house.

It is the R2E silent and low consumption motor that takes ambient air near the wood appliance. The air then circulates towards the exchanger duct before being distributed at the right temperature in the rooms of the habitat, via the air outlets.

AIRWOOD Alliance with BOOSTY, for pellet stoves and VMC double flow

AIRWOOD Alliance is suitable for pellet stove + double flow VMC configurations. It provides better performance of the device and improves thermal comfort in the home.

In the case of Alliance, the exchanger duct from the PGI range (triple wall duct designed for pellet stoves) connects to the blowing network of the double-flow VMC. It is this network which ensures the circulation of air in the distribution network, from the intake of fresh air to the air outlets in the rooms, via the exchanger.

The average increase in air temperature is 30%, up to an additional 10 ° C distributed in the rooms.

AIRWOOD Sunwood, associated wood and solar

AIRWOOD Sunwood is compatible with log and pellet stoves. It cleverly combines two 100% renewable energies, wood, with the wood-burning appliance, and solar, with the aerothermal solar panels. AIRWOOD Sunwood thus promotes home energy mix. The addition of aerovoltaic panels (optional) allows produce in addition to electricity for self-consumption.

In solar heating mode, this system enables controlled distribution of hot air in the home using fresh air taken from the roof via aerothermal and / or aerovoltaic solar panels.

In wood heating mode, the ambient air is drawn near the wood appliance in operation and heated in an exchanger duct integrated into the smoke duct.

AIRWOOD Sunwood can also cool the house down to 3 ° C in summer season. On summer nights, the air is cooled under the solar collectors and allows passive cooling of the home.

AIRWOOD under ATEC and compatible with RT 2012

• The 3 solutions of the AIRWOOD range are under Technical Advice.
• The AIRWOOD range can also be used in RT 2012 regulatory calculations thanks to the TITLE V System - Exchanger duct.
• The AIRWOOD range benefits from the CÉRIC Label (CÉRIC Laboratory).

For more information about her, click here