Webermur 115 enaé, new Weber mortar for wall smoothing, debubbling and concrete repair

This latest addition to the enaé[1] “reference” range claims, in fact, a 20% reduction in carbon emissions compared to a traditional wall smoothing mortar (webermur plus type).

Intended for leveling, de-bubbling and catching up concrete, on interior walls (and ceilings) as well as exterior walls, webermur 115 enaé offers the advantage of optimal versatility. With excellent spreading on the support, it can be applied in a thin thickness (smoothing) or in a more substantial thickness (catching up). And always with the desire to simplify the daily life of craftsmen on site, Weber has equipped the bags of webermur 115 enaé (20 kg) with an ergonomic handle for easier handling.

An ever more sustainable Weber offer…

webermur 115 enaé displays CO emissions₂ reduced by 20% over the entire life cycle (in comparison with the webermur plus leveling compound formula): a reduction in environmental impact supported by an FDES (Environmental and Health Declaration Sheet) on the INIES website[2]. It should also be noted that webermur 115 enaé claims to be manufactured with Guaranteed French Origin, promoting short supply chains, optimized transport and the use of local resources.

With webermur 115 enaé, Weber confirms once again its commitment to ever more sustainable construction and renovation sites!

… without compromising on maximum performance

Versatility characterizes the new webermur 115 enaé. First of all, let's note the versatility of the supports on which it can be applied: concrete, undercoat, hollow brick, concrete block, shuttering block, terracotta, etc. Its application thickness is also versatile (from 1 to 15 mm), depending on its area of ​​use: leveling and debubbling of interior and exterior walls, but also ceilings, smoothing (thin thickness), or even catching up with shuttering blocks in private swimming pools (high thickness) ... Finally, let's highlight the versatility of the coatings to be associated with it, knowing that it can also remain bare outdoors: paint, thick organic coating (RPE), waterproofing coating, organo-mineral coating, hydraulic coating, tiling (on a continuous leveling thickness of at least 3 mm).

Technical characteristics webermur 115 enaé

• Packaging: 20 kg bag
• Color: light gray, close to the color of concrete
• Mixing: 3.8 to 4.2 liters of water per 20 kg bag
• Granulometry: 0.3 mm
• Versatile application thickness: from 1 to 15 mm
• Consumption: 1,4 kg/m²/mm thickness or approximately 14 m² per 20 kg bag for an average thickness of 1 mm
• Adhesion to concrete: ≥0,5 MPa
• Adhesion to concrete block or hollow brick: ≥1 MPa
• Tensile/flexural strength: 5 MPa
• Compressive strength: 25 MPa
• Recommended retail price in € excluding VAT: €19/20 kg bag

[1] The enaé range consists exclusively of products with a reduced carbon footprint of at least 20%* and/or a reduced content of at least 15%* in non-renewable virgin raw materials, all covered by a third-party verified FDES, published on the INIES database. *compared to a product with the same performance or area of ​​use

[2] Go to https://www.base-inies.fr/ and search for webermur 115 enaé in the Product Name box