Watco's Epoxy Grip Maxi paint for exceptional slip resistance

Falls on the same level should in no case be underestimated, because in 2022*, they are the 2nd cause of workplace accidents resulting in at least 4 days of downtime. Each year, more than 100.000 falls on one level are recorded.

It should also be noted that, contrary to what one might think, falls on one level are anything but benign. According to Social Security data, they represent 11% of all workplace accidents and are responsible for 15% of the most serious permanent disabilities.

These accidents are often perceived as minor, but they can cause serious injuries, including permanent disability. More than 10% of workplace accidents with lost time are due to slips. All sectors of activity and all professions are affected, although some, such as the food industry or mechanical manufacturing workshops, are particularly exposed.

*Source INRS

WATCO® committed to securing floors

WATCO® has studied the problems commonly associated with slippery floors, both inside and outside of buildings. The identification of a diversity of floor types used in professional environments, as well as the configurations of potential dangers associated with these floors, allowed them to develop an unalterable solution for securing floors. The optimal solution to prevent slips is undoubtedly to apply an anti-slip coating. WATCO® explains that sandblasting paint can provide a rough surface, but this method tends to wear away over time, becoming difficult to clean, as the rough edges often trap dirt and contaminants, making the floor look new again. sliding. To obtain a surface that is both non-slip and easy to maintain, WATCO® recommends opting for a coating containing anti-slip particles. These particles create a slightly granular texture on the surface, making the floor easier to clean.

And, for increased durability, WATCO® recommends the use of an epoxy resin-based coating, capable of keeping the anti-slip aggregate in place over the long term. This ensures continued safety for the floors of the premises. From these studies and expertise was born the coating Epoxy Grip® Maxi. This paint is the unfailing solution for securing floors.

Exceptional slip resistance

The exceptional slip resistance of Epoxy Grip® Maxi is distinguished by its pendulum test value (PTV) of 69, far exceeding the threshold of 36 which indicates minimal slip potential. This feature makes it an essential choice for securing various environments, whether slippery, wet or oily. Applications for Epoxy Grip® Maxi are varied, extending from production areas to steps, ramps, walkways, loading docks, entrances, exits, parking lots, and all areas exposed to vibration, both indoors and outdoors. 'outside. Thanks to its performance, this coating guarantees the safety of users and helps to considerably reduce the risk of accidents.

Three formulas, the same excellent chemical resistance

The epoxy formula of Epoxy Grip® Maxi offers very good resistance to chemicals such as gasoline, diesel, bleach, oil, antifreeze and many others. Three versions are available: Epoxy Grip® Maxi, Epoxy Grip® Maxi Cold Version et Epoxy Grip® Maxi Flex. All three are anti-slip paints, intended for interior and exterior use. They comply with CE EN 1504-2 with outstanding test results for resistance to wear, scratches, impact, as well as adhesion, strength and flexing. In addition, they offer excellent resistance to chemicals and have a low level of volatile organic compounds (VOC) category A+.

Epoxy Grip® Maxi Cold Version stands out for its ability to be applied at temperatures as low as 0°C, for reliable anti-slip protection in unheated areas or outdoors.

Epoxy Grip® Maxi Flex offers flexibility adapted to environments subject to vibration, movement, or expansion. Its poly aspartic formula is perfectly suited to environments exposed to chemicals and UV rays.

The preparation of Epoxy Grip® Maxi is simple and is limited to mixing the resin and the hardener until a uniform color is obtained. Once the paint has been applied, all that remains is to sprinkle the anti-slip aggregate on the surface and iron the roller to ensure its incorporation. A single coat of Epoxy Grip® Maxi is sufficient to effectively secure the most slippery surfaces.

One of the major advantages of this formula is its ability to harden without the need for water.

This makes this product particularly suitable for poorly ventilated environments, low temperature or high humidity areas. In addition, the drying time is fast: in just 12 hours the floor is ready for light traffic, and after 24 hours it is perfectly suitable for heavy traffic.

Slips are generally caused by ground characteristics altered by the presence of spilled oils or liquids. Preventing these accidents is therefore essential, and it must start with securing the floors and implementing good upkeep and maintenance practices for installations and premises. Epoxy Grip® Maxi paint is the solution to guarantee optimal safety on wet or oily floors. Offering a unique combination of performances: fast drying, chemical resistance, non-slip finish, this paint is a first choice solution for demanding environments. Designed to ensure optimal safety on wet or oily floors, this paint is high performance and allows, in a single coat, to ensure the safety of workers and improve their working comfort.