Viessmann presents three new products from individual housing to the tertiary sector

Vitocal 262-A thermodynamic flask

This new Viessmann solution, manufactured in Faulquemont (57), uses free energy from the air, indoors or outdoors (from -10° C to + 42° C), for the production of domestic hot water, in addition or not a heating generator, for example an air/water heat pump, an oil, gas or biomass boiler. Note that it comes in three variants. The hybrid (type T2H, with heat exchanger), replacing an existing DHW tank, but also in an electric version (type T2E) which will be preferred as a replacement for an electric water heater or in addition to a heat pump dedicated to heating, but also in a wall-mounted variant (type T2W), in combination with a DHW tank, a combined tank or a primary tank. Equipped with an integrated 300 l tank, this thermodynamic tank can be installed in place of a traditional DHW tank. Note that its operation will also be optimized in a laundry room or technical room, places in which a large quantity of heat is produced and available.

It should also be noted that the Vitocal 262-A displays a performance coefficient of up to 4 on ambient air (up to 3,39 on outside air), guaranteeing a low operating cost coupled with great DHW comfort. . It also boasts quiet operation thanks to low noise emissions (ranging from 53 dB to 47 dB depending on the model). Energy class A+ or A++, the Vitocal 262-A preserves the environment thanks to its natural refrigerant R290 (Climate Protect+++) which ensures a flow temperature of 65°C down to -10°C, thus considerably reducing use of the electric heating system.

Optimized for self-consumption of electricity produced by a photovoltaic installation, it is eligible for financial aid. If the monitoring of the state of the protective anode is carried out simply by Viessmann regulation, its commissioning by the installer is guided by means of ViGuide, which also allows it to be monitored remotely. Finally, let us mention that its management is intended to be very simple, since it is operated via the ViCare application. Indicative public price from 3800 euros excluding tax, excluding accessories, installation and installation
in service.

Vitotrol 100-EH remote control

The Vitotrol 100-EH allows the heat pump to be controlled from any living space. Easy to install since it requires no cables thanks to its (encrypted) radio technology, the Vitotrol 100-EH remote control, powered by batteries (type AA, 2 x 1,5 V) offers a modern and timeless design. It has a bright screen to display the room temperature, outside temperature, time and the operating states of the heat pump. It also allows you to control the heating/cooling circuit according to the outside temperature, such as DHW preparation since it is possible to connect several Vitotrol 100-EHs (one per circuit). CEE compatible, it offers the possibility of creating a time schedule for heating such as DHW but also of automatic software updates via the internet. It can manage a comfort mode, a vacation program, a vacation at home program or even an absence mode. Finally, eligible for financial aid, Vitotrol is marketed at the indicative public price of 249 euros excluding tax.

Vitocrossal 300 CI3 condensing boiler

This new gas condensing boiler, compact and economical, is intended for heating and the production of DHW in collective buildings, the tertiary sector and communities. The Vitocrossal 300 CI3 boasts great ease of installation, thanks in particular to its width of 75 cm, its integrated casters and its transport pallet with integrated ramp.

With its small footprint (0,75 to 1,07 m²), the Vitocrossal 300 CI3 boiler will also be used for renovation in buildings with cramped boiler rooms. Delivered pre-assembled and factory tested, the Vitocrossal CI3 is available in eight powers (80, 115, 160, 240, 320, 480, 560 and 640 kW) and also offers cascade operation, up to 8 boilers, capable of generate power of up to 5.120 kW. Equipped with the MatriX cylindrical burner, guaranteeing combustion with low polluting emissions, the Vitocrossal CI3 has a significant modulation range which can go beyond 1:10 depending on the model, for prolonged and sustainable operation. Please note that the self-calibrating O2 sensor automatically adjusts combustion to different types of gas (natural, propane, mixture containing up to 20% hydrogen).

Equipped with the new Inox-Crossal heat exchanger, made of high-quality stainless steel, synonymous with high operational safety and a long lifespan, the Vitocrossal CI3 displays a standardized efficiency of up to 97,7% on PCS . Finally, let us point out that the Vitocrossal CI3 is integrated into the Viessmann One Base platform, guaranteeing simple and intuitive commissioning via mobile ViGuide and also allowing remote monitoring by a professional (via smartphone or tablet), as well as optimization of parameters without expect that the maintenance to be carried out will be reported in time. Indicative public price from 12.500 euros excluding tax, excluding accessories, installation and commissioning.