ThermaCote®, an avant-garde paint for the thermal insulation of roofs, facades and floors
Product zoom
Par Bat infosource: Durieu Group
Limit the rise in temperature of materials and buildings, prevent heat loss: when an insulating paint provides a simple and ultra-technical solution. Durieu chooses to register with ThermaCote® in the future by working on insulation and helping to limit energy consumption.
Thermal insulation is a major concern today and the issue for our country has become general for all regions and not just large cities. Insulating roofs, facades or floor coverings, high temperatures and limiting heat loss are at the heart of the considerations for builders, individuals and our political leaders.
With THERMACOTE®, Durieu provides thermal insulation with a highly technical, cutting-edge solution that responds to multiple current constraints.
THERMACOTE® specific advantages:
Very high concentration of dry extracts guaranteeing unstoppable efficiency and long-term protection of all protected surfaces.
Composed mainly of ceramic (80% of the paint), the protected coating benefits from the insulating capacities of ceramic and its resistance to high heat.
In short: the protected supports see their temperature decrease appreciably or their heat loss is reduced during the winter.
explanations:
THERMACOTE® an insulating coating that goes further, 3 vectors of action: Thermal insulation / Anti-humidity / Airtightness.
Thermal insulation:
Thanks to its specific formulation THERMACOTE® acts as a survival blanket on supports. It envelops them with a protective layer which, in cold periods, limits the passage of heat to the outside by "returning" the heat to the interior of the building and in hot periods allows the reflection of part of the heat outside. of the support thus making it possible to significantly reduce the temperature felt on the surface. Thus, a support protected with THERMACOTE® can go from 60 ° to 38 °.
Anti-humidity:
Moisture is the first enemy of insulation because it seeps into the walls and causes the formation of condensation and rust. THERMACOTE® protection allows the support to breathe, by extracting moisture while preventing it from entering.
Air tightness:
The infiltration or leakage of air in the supports is a guarantee of deterioration of the insulation and the application of THERMACOTE® avoids this phenomenon. The insulation is long-lasting.
The combination of the insulation of the substrates against heat, cold, humidity and air makes it possible to:
Avoid thermal shock and therefore the presence of humidity or condensation.
Prevent rust formation induced by air or humidity with the metal supports and thus prevent the reinforced concrete from rusting and therefore from bursting.
THERMACOTE® is also acting for tomorrow thanks to its action today in Europe and in the world
In the USA, THERMACOTE® is approved by the Cool Roof Rating Council and in Europe by the European Cool Roof Rating Council, attesting to the effectiveness of the product for the protection and insulation of roofs.
In Los Angeles, THERMACOTE®, along with the State of California and other manufacturers, is part of an experimentation and research group aimed at protecting all bitumen or concrete surfaces on the ground (roads, parking lots, etc.) in order to limit the effect of urban heat islands which prevent urban temperatures from decreasing.
In France and beyond the metropolis (Réunion, Martinique & Guadeloupe), THERMACOTE® is being tested for the study of the coating of several public buildings: roofs, pavements in order to limit the effects of heat islands.