Indeed, in addition to its efficiency and robustness, the new floor sander is both compact and relatively light. It meets the needs of asbestos removal operations, but also other types of sites requiring sanding of floors.
Here is a product that marks an obvious break in the service of technicians. There are many very physical operations and manipulations on construction sites. While the machines at the service of technicians greatly facilitate the task and reduce turnaround times, they sometimes remain a burden when it comes to moving and transporting them. This subject is the subject of increasing attention from companies. Conscious of this approach, Lapro Environnement highlights the advances of Siprotool applied to the new DF-M300 floor sander.
Compact and light
This sander offers the advantage of real compactness compared to products of equivalent power usually offered on the market. For example, its handle can be folded up to a total height of less than 50 cm, in order to facilitate storage in a room, transport in a compact vehicle or movement on sites that are among the most difficult to access. Its width? Barely wider than an A4 sheet (328 mm). Something to go everywhere or almost. This compactness facilitates the operation of sealing in a double waterproof bag when leaving a confined work area.
With a mass of only 35 kg, the Siprotool sander is also much lighter than its competitors equipped with a conventional motor and often weighing more than 60 kg! Two handles make it easy to carry without risking the machine slipping out of your hands. At the time of the hunt for musculoskeletal disorders (MSDs) in companies, this is good news for technicians and those in charge of health and safety prevention on construction sites. And that's not all: the integration of a new generation electric motor helps reduce the noise level and vibrations of the machine.
High efficiency motor
Equipped with a brushless electric motor (brushless technology) of 2 W, the Siprotool DF-M200 floor sander develops better efficiency (no overheating) and consumes less energy for a smaller volume and footprint. The brushless motor contributes significantly to lightening the machine and is satisfied with reduced maintenance. All for an equivalent working power on site.
300 MM working width
Streamlined according to a simple and above all efficient design, the sander adopts an integral dust guard, optionally lined, under which a 300 mm diameter disc operates at 2 rpm. The latter is surmounted by the engine block and two side suction manifolds. Dust extraction is carried out using an ALS / DLS (A La Source / De La Source) system in order to guarantee maximum operator safety.
Optionally, two discs can be fitted to the sander:
- Green disc (universal) - It is suitable for most treatments;
- Fuschia disc with PCD (Poly-Crystal Diamonds) segments - It is ideally suited for removing glues and other thin layers.
The disc change is done very simply and without wasting time.