Schöck: innovative and optimized solutions for concrete prefabrication

Indeed, combining quality, safety and efficiency, these solutions meet the requirements of contemporary construction while offering concrete advantages to prefabricators, including cost reduction, time savings and improved durability.

Overview of the complete panorama of Schöck's flagship products according to the main prefabrication applications (prefabricated slabs, walls, balconies and acroteria, stairwells).

Pre-slabs: significant thermal and structural gains with Rutherma^® and Bole^®

The breaker for ITI Schöck Rutherma^®, certified by the CSTB for all seismic zones, guarantees high-performance thermal insulation, reducing structural thermal bridges by up to 90%. Easy to use with pre-slabs, it is both lightweight and modular, ensuring rapid and secure installation. On the prefabrication side, this represents an easy-to-handle solution in the factory, precise alignment of elements thanks to the tenon-mortise system, as well as a reduction in energy costs for the end customer.

The Schöck Bole anti-puncture reinforcement^® simplifies the design of slabs by eliminating the need for beams to fall between the columns. It ensures architectural and economic optimization of projects, with a significant reduction in both concrete and formwork requirements.

Delivered ready to install (via rails positioned on the prefabrication table), this turnkey solution thus contributes to increased productivity and strengthened competitiveness.

Strasbourg Bowling, Orangerie Park

Located in the heart of the Parc de l'Orangerie, an iconic and popular location in Strasbourg, the Bowling de Strasbourg is undergoing a complete overhaul, led by the Fehr company for the construction and production of prefabricated elements. This ambitious project aims to breathe new life into the building by integrating new bowling lanes, modern seminar spaces, and redesigned social areas.

To meet the technical requirements of this transformation, Fehr relied on Schöck for the treatment of the columns integrated into the structure. Schöck Bole punch-resistant reinforcements^®, recognized for their performance in transmitting punching forces, were used at two key levels of the project:

• In the raft, with a thickness of 40 to 55 cm, to ensure optimal distribution of loads at the foundation level.
• At the PH RDC & PH R+1 level, with posts integrated into the pre-slabs, guaranteeing structural continuity and easy implementation.

This project perfectly illustrates Schöck's ability to support complex restructuring projects, while providing reliable, sustainable technical solutions adapted to the constraints of the site.

Walls: innovative thermal connectors with Isolink^®

The Schöck Isolink connector^®, made of composite glass fibers, has two main advantages: very low thermal conductivity combined with ease of installation. Suitable for insulated pre-walls and sandwich panels, it provides continuous and uniform insulation, guaranteeing comfort for occupants. Certified by the Passivhaus Institute, Isolink^® meets the most demanding energy efficiency standards, while offering unparalleled flexibility for architects. It should also be noted that it can be positioned in high-quality exposed concrete facades (formed, painted, etc.).

Isolink^® provides prefabricators with a high-performance, cost-effective alternative to traditional anchors in insulated pre-walls, with only 4 connectors required per m² and a significant reduction in thermal bridges. Installation is simple: Isolink^® are easily placed through the insulation. The Screwtool tool allows for even faster implementation.

Stade Rochelais Performance Center, Apivia Parc

Schöck Isolink^® was chosen by Groupe GA for the prefabricated facade walls of the Stade Rochelais Performance Center, Apivia Parc (17). The 4,000 m² building, L-shaped on two levels, includes an entrance hall, changing rooms and toilets for professionals and U22 players, two weight rooms, as well as upstairs, offices, a restaurant, a video room and a cardio-stretching area. An indoor training field with synthetic turf completes the complex.

For Jean-Pierre Renaud, from the Architectes Associés Agency: « This project is based on strong values: rigor, respect, humility, conviviality... We wanted a robust and stable architecture, expressed by the use of raw concrete, sometimes textured like wood, sometimes smooth and light »

Concrete, used in double-sided insulated panels, guarantees durability, thermal comfort and resistance, while creating interior atmospheres with touches of color.

The GA Group ensured the completion of this ambitious project, with prefabrication of the panels at the Criquebeuf-sur-Seine (27) factory. In total, 6,700 Schöck Isolink connectors^® were used for the 180 sandwich panels representing 2,000 m² of facade. The project was completed in just 8 months. The walls were manufactured in two months, then delivered to the site in 15 days, at a rate of around ten panels per day.

Balconies and Acroteria: perfect integration with Isokorb^®

The Schöck Isokorb thermal bridge breaker^®, for ITE, guarantees optimal reduction of energy losses and perfect integration with prefabricated elements. Under DTA validated by the CSTB, with two thicknesses to choose from, 80 mm (T) and 120 mm (XT), Isokorb^® simplifies the manufacturing process for balconies and parapets by directly integrating thermal insulation, combined with acoustic insulation. This allows for the delivery of elements ready to install on site, thus reducing assembly constraints, in particular reducing the risk of damage to balconies and disruption to public spaces.

Lille Biotope

For the Biotope building in Lille, 74 cantilevered balconies were treated both thermally and structurally using 450 Schöck Isokorb breakers.^® (types K, K-BH and ESi). It should be noted that 470 m² of insulated pre-walls on the ground floor have integrated approximately 2,000 Schöck Isolink thermal connectors^®.

To ensure consistent thermal performance, Bouygues Construction chose Schöck to supply thermal breaks adapted to this complex project. Indeed, Schöck solutions are the only ones on the market to have a Technical Assessment for use in ITE in seismic zones. However, the Biotope, classified in importance category 3, is located in zone 2.

Concretely, 200 linear meters of Schöck Isokorb breakers^® K-type units were used for conventional balconies, 100 K-BH-type units for raised balconies (30-60 cm offset), and 150 ESi modules were added to absorb seismic forces.

Stairwells: proven acoustic comfort thanks to Tronsole^®

Schöck Tronsole^® meets the growing demands for acoustic comfort. Designed to effectively insulate impact noise in stairwells, this system has the advantage of being compatible with many configurations (straight, turning or spiral staircases).

Tronsole^® This offers the prefabricator the possibility of producing ready-to-use stairs with integrated acoustic insulation, reducing the need for on-site intervention and increasing the value of real estate.

A cross-functional solution with Signo^®, lost formwork for an impeccable finish

Among the Schöck solutions that can be suitable for multiple prefabrication applications, Signo^®stands out as a versatile lost formwork, easy to integrate into the edges of pre-slabs, beams, balconies, or even walls. Integrated directly in the factory, Signo^®replaces traditional formwork, thus saving considerable time. In addition to an impeccable finish of the slab edges with a smooth and uniform facing, this Schöck solution allows for easier handling thanks to its lightness, while reducing production costs.

Ycone Tower in Lyon

Plattard used over 300 linear meters of beams incorporating Signo formwork for the Ycone Tower in Lyon, a project designed by Jean Nouvel. Standing 64 meters tall, this tower houses 92 residential units, 660 m² of retail space, and features lightweight architecture thanks to a timber frame, a concrete facade clad in aluminum, and a double glazed skin.

Prefabrication greatly simplified the construction site. The beams are pre-formed in the factory with Signo formwork already integrated, ready to be installed and poured with the floor. Their hollow shape makes them lighter and easier to handle, and keying between beams is quick: simply cut the formwork to pour the nodes and column heads in one go.

Six different heights of Signo were used to adapt to the construction site configurations. The Signo 0DW models, without sealing joints, with a chamfered profile, provided an impeccable finish.

It should be noted that Schöck Signo formwork stands out for its resistance to bending (15-16 N/mm²), pressure (55-60 N/mm²), as well as frost and weathering. Another advantage: this solution generates no waste, either in the factory or on site. It also limits disturbances for local residents by reducing the noisy formwork and pouring phases on site.

Schöck, a committed partner for concrete prefabrication

Beyond its innovative products, Schöck supports precasters with advanced tools and customized services. These resources include sizing software for Bole solutions.^® and Isolink^®, a comprehensive BIM/CAD library, as well as tailored technical assistance, both in the factory and on site. This 360° support reduces errors, accelerates design and production processes for perfect control of complex projects.

A leading player, Schöck offers certified, high-performance solutions designed to easily integrate into industrial prefabrication processes. This expertise serves the quality, durability, and comfort of tomorrow's buildings.

TELLIGENT^® : Constructive intelligence at the service of prefabrication and modular construction

TELLIGENT^® is Schöck's new global concept for faster, more flexible and more cost-effective construction. Designed to meet today's building challenges, TELLIGENT^® combines intelligent connection solutions and comprehensive technical support, specially designed for prefabricated and modular building elements.

Based on decades of expertise and developed in close collaboration with customers, TELLIGENT^® combines proven quality, product innovation, and customized services. The goal: to optimize lead times, control costs, and ensure smooth implementation, from project to installation.

With TELLIGENT^®, Schöck is rethinking construction to make it a lever for performance. A concrete response to the new challenges of modern construction.