Plastor presents a new range: Hard floor and Parquet oil Bare wood effect

A totally invisible result to preserve the natural and raw beauty of the wood

Warm, wooden parquet is very trendy. Each essence has its own color, veining and rendering, which brings a unique authenticity to the place. To last, this coating needs to be protected against traffic, stains and humidity. But often vitrifiers and oils enhance the color of the wood and strongly yellow due to the rise of tannins. For all those who wish to preserve the raw appearance of wood, Plastor, specialist for more than 50 years in the manufacture of finishes for the protection of floors, has developed a new range with 2 products for parquet, completely invisible: the Hard bottom and Bare Wood Effect Oil.

Made in France in the Jura, these new Plastor bare wood effect products retain and protect the natural beauty of wood, without warming up or bleaching the original wood. Simple and quick to apply, they limit the constraints of construction sites for parquet professionals.

Prep time

New - Bare wood effect hard bottom - Gripping undercoat

To ensure a perfect finish to light or unfinished parquet floors, the new Plastor bare wood effect hard primer impregnates the wood deeply, blocks tannin build-up while completely retaining its color to leave it with a totally natural appearance. This bonding undercoat is used as a system with all PUR-T® Plastor aqueous phase sealers. It is recommended to apply it with the matt PUR-T®3 DUO sealer to keep a completely invisible finish.

Ready to use and easy to use, its fluid formulation allows uniform application without trace of resumption. Thus, the new Plastor bare wood effect hard floor offers pleasant working conditions for parquet flooring craftsmen. It dries very quickly, in 1 to 2 hours between coats, and does not require ginning. It is advisable to apply 2 coats of undercoat and 1 coat of vitrifier.

• Yield: 10 m2 / L per coat
• Available in 1L and 5L

Finish

New - Bare wood effect parquet oil - Protects the nature of the wood

Completely invisible, Plastor Bare Wood Effect Oil effectively preserves parquet floors while enhancing the authenticity and natural feel of wood species. In aqueous phase, its high quality formulation deeply nourishes the wood and durably protects all new or old floors from daily aggressions, stains and humidity.

Ready to use, this novelty ensures the complete oiling of a parquet floor in 1 day, with a single ginning between the 2nd and 3rd coat and a drying of 1 to 2 hours between 2 coats. This application without buffing thus allows the flooring workers to carry out 3 coats in the day, a real time saver, appreciable on the construction sites. With no embarrassing odour, this parquet oil, which releases only 25 g/L of VOC, is very pleasant to apply.

Excellent protection for parquet floors subjected to intense daily traffic, Plastor Bare Wood Effect Parquet Oil gives them excellent resistance to wear and makes them easy to maintain.

• Yield: 15 m2 / L per coat
• Available in 1L and 5L