Hager launches four new charging stations for electric vehicles

These innovatively designed models stand out for a better user experience: easier implementation for the installer, more intuitive use for the end user. Hager, among the pioneering manufacturers of charging stations since 2013, is thus strengthening its presence in the energy management market.

The four new witty stations are all ZE and EV ready 1.4 certified. Designed for residential use, they have a charging point from 7 to 22 kW, allowing you to charge one vehicle at a time. Lighter, easier to handle, their installation by an IRVE certified professional [1] is easier. For example, the craftsman has more space to make the initial connections, which makes installation easier and faster. For the user, the experience is also improved: activation is carried out using a key, a simple display on the front panel clarifies the connection and disconnection steps, a cable reel can be attached to the 'front of the bollard or deported.

Data recovery and dynamic load

An RF (Tele Information Client) transceiver can be installed as an option with each terminal reference. This communicating device is placed in the Linky meter and transmits the power and tariff information to the Witty charging station. It makes it possible to better control its consumption, by providing the vehicle with the right amount of energy while keeping energy available for other uses in the house.

Witty, a complete offer

With the witty offer, Hager offers a complete range of solutions for charging electric vehicles:

• 3,2 kW reinforced witty socket to ensure the electrical safety of users;
• Witty home charging stations with an indoor or outdoor charging point for residential use from 7 to 22kW (normal or accelerated charging). It can also charge an electric two-wheeler;
• Witty park charging stations with two indoor or outdoor single-phase or three-phase charging points for the tertiary sector from 7 to 22 kW, usable with an RFID badge, connected to Charge Point Operators (CPOs), service providers or payment operators.

Customized certification training

To develop their activity on the growing market for charging stations, installers have a tailor-made training offer and expert technical support.

The training organization Hager Explore provides in particular the training "Mention IRVE" level P1, P2 and eV Ready Q1, Q2 and Q3. Accessible face-to-face and remotely, this theoretical and practical training provides essential and compulsory lessons in the implementation and securing of electric vehicle charging infrastructure. It allows installers to then apply for their “IRVE Mention” certification from Qualifelec and AFNOR Certification bodies.

Technical specifications

Witty home terminals 1 key charging point:

• IP55 - IK10
• Integrated 6 mA DC protection
• Intelligent load management, dynamic load shedding by connecting the ICT (historical and standard),
• Power limitation or pause mode on external signal,
• Deferred charging on D / N signal or 24 V DC signal with forcing possible
• Temperature: -25 ° C to + 55 ° C
• Charge status indication LED
• Locking of the T2S socket on charge (automatic unlocking when the cable is removed from the car side)
• Polycarbonate casing
• Integrated or remote cable reel
• Wall or stand installation

4 references available:

• XEV1K07T2TPFR (7kW, T2 socket, TIC and Protection)
• XEV1K07T2TETPFR (7kW, T2 + TE socket, TIC and Protection)
• XEV1K22T2T (22kW, T2 socket, TIC)
• XEV1K22T2TET (22kW, T2 + TE socket, TIC)

The new 1-point charging stations replace the witty eco XEV092 and Witty premium XEV10x models.