Edilteco® obtains the ETA and DTA technical assessments from the CSTB for its Edil-Therm® Minéral system

This system consists of a thin undercoat based on hydraulic binder, reinforced with a fiberglass mesh and applied directly to rock wool panels mechanically fixed by dowels or nails by gun-sealing on the wall. support. The finish is ensured, as desired, by a thin coating based on an acrylic binder, a coating based on an acrylic binder with siloxane additive, a coating based on a silicate binder, or by decorative synthetic briquettes.

EDIL-Therm® Mineral, for insulation, repair and protection of facades

Intended for the insulation of all types of new or old buildings (individual and collective housing, offices or commercial premises, etc.), the EDIL-Therm® Minéral process is also used for the repair and protection of degraded or thermally insulated facades.
The rock wool insulation panels comply with the NF EN 13162 standard in force, have been the subject of CE marking, a Declaration of Performance, and a valid ACERMI certificate.
Available in thicknesses ranging from 30 to 200 mm, EDIL-Therm® Mineral panels offer a thermal resistance which therefore varies from 0,75 (m²K/W) to 5,55 (m²K/W) for the thickest.

A complete range of components – glue and leveling agents (with or without cement), fixatives and base regulators, thin coatings of finishes based on organic and mineral resins is associated with the system, offering the possibility of benefiting from a wide choice of appearances. , grain size and shades.

EDILTECO®, being a systems manufacturer, the company also offers a standardized range of accessories (profiles, rods, fittings, dowels, etc.) and thus exempts the professional from having to obtain supplies in several installments, from different manufacturers. EDILTECO® will select and supply the accessories according to the specifics of the construction site and the required thickness of the insulation, so there is no risk of error.

When the regulations relating to the structure concerned require the taking into account of provisions vis-à-vis the propagation of fire on the facade, the EDIL-Therm® Mineral process (incombustible Euroclass A1) is particularly recommended to guarantee this fire resistance. . The EDIL-Therm® system has a fire reaction classification A2-s1, d0 in accordance with standard NF EN 13501-1.

With the obtaining of this new DTA 7/23-1795_V1, EDILTECO® provides applicators with reliable and objective elements of assessment in order to best support them in the use and application of the EDIL-Therm® Mineral system, considered a non-traditional solution in the building market. Reference documents for construction professionals – the ETA and DTA characterize the performance of the product, certify its good design, its compliance with the requirements of each construction site, and guarantee the durability and effectiveness of this insulation solution thermal exterior with thin coating.