This new Politerm® R version is designed with recycled polystyrene and is part of a circular and responsible economy approach.
EDILTECO® recovers the offcuts obtained during the cutting of panels on its production lines in order to reintegrate EPS into production processes.
The offcuts are crushed to collect the EPS beads which are then introduced into the production line with the other new EPS beads.
Politerm® R can be used to insulate and thermally and acoustically treat different types of existing supports, both in apartment buildings and single-family homes: masonry supports, wood, steel tubs, floor coverings and old coverings, screeds, racks, level adjustments, slope shapes, thermal and acoustic insulation against impact noises, various fillings, etc.
Another floor solution on display on the stand: LA CHAPE XXs®, a light, fiber-reinforced screed intended to improve the sound attenuation of all floor coverings.
LA CHAPE XXs® is made from beads of virgin expanded polystyrene and coated with the EIA adjuvant (Diameter 2 - 3 mm).
The density of the mixture - 1200 kg / m3 - is twice as light as a traditional screed. Thanks to its lightness, LA CHAPE XXs® does not overload structures.
A lightness that does not come at the expense of a high quality of robustness: fiber, it has high mechanical properties.
Its ease of implementation will allow it to be used for many uses: adherent or detached screeds, level adjustments, slope shapes, sound insulation against impact noise, surface dressing and leveling of floors; on roofs with no slope or slope up to 15%, with waterproof membrane covering (DTU 43.1).
Another advantage, LA CHAPE XXs® can be used from a low thickness: 1 cm in bonded installation on concrete, 2 cm in uncoupled installation on wood, 5 cm on SCAM ≤ 0,5 cm including beyond everything element embedded in LA CHAPE XXs® (ducts, pipes, etc.). For the applicator it is therefore an additional time saving in the casting of the screed, the assurance of a perfectly smooth and homogeneous finish of the floors and the possibility of multiple uses.
For the facade, the “best-selling” ECAP® and EDIL-Therm® PSE ranges in a fixative-free version will be exhibited.
Finally, the new range of floors will present: Delti-Poutrelles, a complete range of prestressed beams. Designed as an inverted T with a two-way notch on the top and reinforcements protruding from each end of the joist, special attention is paid to the finish of the joists.
This perfect mastery of the finishes ensures them a heel thickness without concrete accumulation and perfectly straight joist ends, in particular by the use of EPS separators during molding.
Designed according to the rules of the art, the Delti-Poutrelles range meets all the requirements of the DTU 23.5 standard. Certified in accordance with the NF 395 certification reference system Concrete beams for joist and interjoist floor systems, this range provides excellent bending performance and guarantees the production of floors that are robust, stable and durable over time.
There are 3 ranges of joists and each brings together several types of joists. Each range begins with "DP" followed by the height of the joist (from 110 to 130) and the type of prestressing. The RE range is equipped with passive steel reinforcement to gain reach without a forestay.
They make it possible to reach large spans 5,10 m long without props and 8,30 m with props, which offer great freedom in building design by significantly reducing the need for cross walls. Due to the attention paid to manufacturing quality, the Delti-Poutrelles range is able to withstand significant loads.
DELTIVOUTAIN + CI - for Integrated Corrector - is an interjoist with an integrated breaker. Efficient but above all very functional, the DELTIVOUTAIN + CI incorporates its breakable thermal bridge corrector (UP <0,27) on the underside. This breaker is easily broken by hand.
Patented, this solution now benefits from a CSTB Technical Assessment issued by the Specialized Group n ° 20 “Special insulation products and processes” and the Specialized Group n ° 3.1 “Floors and floor accessories” which respectively examined this process.
Intended for buildings and individual houses with crawl spaces, the DELTIVOUTAIN + CI will make it possible to provide both the formwork of the compression slab and the insulation of the floor. Lightweight, it is easy to install and effectively reduces thermal bridges for new work but also for renovation work.
Its qualities are numerous, but its major attraction lies in its both practical and economical aspect which protects building professionals from a double management of stock of slabs and breakers and offers them the economy of structural elements that have become unnecessary. .
Artibat has been the benchmark trade fair for building professionals for 31 years. A partner of craftsmen and construction majors, EDILTECO® follows an innovation policy based on objectives bringing product performance gains, while increasing the simplicity and speed of application.
These three days of meetings and discussions will therefore be the opportunity for EDILTECO® to reveal the potential and skills of its solutions and innovations.