Double hot wire cutting table for polystyrene, special ITE: Cutting table Ref.: 368155 by EDMA

The double hot wire cutting table allows a clean cut, without projection of polystyrene beads. It works thanks to a system of 2 perpendicular hot wires which move in the same frame using 2 sliders.
- Max. cutting height: 1320 mm
- Max. cutting depth: 330 mm
- Frame adjustable from 0 to 45°
Discover this new feature
Multi-purpose tool for lifting, hoisting, leveling, spreading, tightening, tearing: TradeLift™ by Stanley

In April 2024, STANLEY launches its latest innovation: the TradeLift™. Robust and versatile, it is designed to lift, level, hold, spread, tear and tighten, with a lifting force of 150 kg, enough to relieve the tradesman's back.
Product characteristics:
Lifting force: 150 kg
Lifting capacity: 7-220 mm
Lifting action: foot-operated lowering lever
Fine adjustment: 0-6 mm incremental, 0-2.5 mm downwards
Stability: large base plate and anchor holes
Discover this new feature
Battery-powered hot wire cutter for expanded and extruded polystyrene: Styrogun Ref.: 368455 by EDMA

STYROGUN allows you to make a clean cut, without the projection of polystyrene beads.
The machine heats up within seconds when the start button is pressed.
- Max. cutting height: 630 mm
- Max. cutting depth: 310 mm
- Adjustable linear guide for angle cuts: from 0 to 45°
Discover this new feature
Anti-MSD (musculoskeletal disorders) wheelbarrow: Réno' Up by Haemmerlin

The Expert 120 Réno' Up Galva inflated wheel is an ergonomic wheelbarrow specially designed to prevent musculoskeletal disorders during repeated use: avoids joint pain in the wrists and reduces the effort required. The tilting handle allows the wheelbarrow to be unloaded in a natural wrist movement, thus avoiding pain during intensive use.
- Inflated wheel Ø 400 mm (PF 128), ball bearing, flanged metal rim
- Dimensions 1530 x 585 530 mm x
- 18,5 kg weight
Discover this new feature
92% bio-based colorless rust inhibitor for long-lasting impregnation, infiltration, insulation and protection: Rustol® 92 Bio-based by Durieu

Rustol Owatrol® was born in France in 1956 from a collaboration between Durieu and an American company. Originally, Rustol Owatrol® was formulated for the automobile industry, particularly garages, where it finally provided the solution for protecting the underbody and all delicate parts of automobiles and bicycles. It then entered the industry (construction, marine, automobile, etc.) and DIY stores.
RUSTOL-OWATROL® 92 BIOSOURCED is a solvent-based varnish based on alkyd resins and vegetable oil. Its formula is optimized to integrate biosourced and eco-responsible raw materials while maintaining the historical performance of classic RUSTOL-OWATROL®. Its high fluidity also gives it excellent primer properties.
Discover this new feature
Portable Power Station: Instagrid ONE by Instagrid

Instagrid One is a one-handed portable professional use battery that replaces 0 to 5 KVA generators.
Power supply equivalent to domestic power supply 3.600 W / 16 A / 230 V
Use of any single-phase electrical equipment, no additional inverter required (maximum power accepted: 18.000 W)
Easy charging from 0 to 100% using a standard socket in less than 3 hours
Easy to carry with one hand
Quiet, no smoke
Usable in all weather conditions (IP54+)
Discover this new feature
Multi-material anchor for a multitude of applications: Shark Twist by Würth

An innovative multi-material anchor that combines performance, flexibility and ease of installation, offering a wide range of possible applications.
One dowel for a multitude of applications!
Goes everywhere: in solid materials as in hollow materials, performance and resistance are there!
Wood or metric thread: it's up to you!
Insertion into the support material up to the wall by simple finger pressure, without the need for a hammer.
Flexible: Each dowel size can be combined with several different screw diameters.
Discover this new feature
Nav mobile 3D scanner: Vis MLX by Geomesure

Compact and dynamic, the new SLAM NavVis MLX improves workflows for accurate surveys and qualitative data.
Range: 50 meters
Measuring frequency: 640.000 points per second
Laser class: 1
Cameras: 4 x 12 Megapixel cameras (panoramic images)
Dimensions : 60 x 19 x 15 cm
Weight: 3,6kg
Discover this new feature
Connected crack meter: R1 gauge by Saugnac

The R1 gauge is a ready-to-use connected crack meter that allows remote crack monitoring. The gauge has three sensors: linear measurement sensor, temperature sensor and humidity sensor.
- Linear sensor: Resolution: 0,01 mm, Measuring amplitude: ~23 mm, Accuracy: 0,1% of the measuring amplitude
- Temperature sensor: Resolution: 0,1°C, Measuring range: -40°C to 125°C, Accuracy: +/- 0,2°C
- Humidity sensor: Resolution: 1% RH, Measuring amplitude: 0-100% RH, Accuracy: +/- 2% RH
- Measurement frequency: Configurable in the application: 4h, 6h, 8h, 12h, 24h
Discover this new feature
Saw blade with depth stop: Starlock by Fein France

Safe sawing with precise cuts has never been easier than with this new FEIN saw blade. It is equipped with an integrated depth stop and thus ensures that the material behind it remains intact when cutting workpieces (e.g. cable ducts or plastic containers).
Safe opening of cable ducts
Protection of non-visible material.
Precise cuts: the blade cuts exactly to a depth of 2.5mm and thus protects the material behind.
Discover this new feature
To vote* now in this category, go here:
https://batinfo.com/trophees
*A free reader account is required to participate in voting