SFA deploys a new comprehensive range of solutions dedicated to the recovery, management and reuse of clear water

The year 2025 is no exception to this rule of innovation. Indeed, SFA is once again demonstrating its inventiveness in creating original solutions that consume little water and energy, with the launch of a new offering specifically dedicated to clear water.

Unveiled at the ISH 2025 international trade show, this new SFA offering addresses both home and garden design needs. SFA now offers equipment specifically designed for the capture, supply, distribution, and reuse of clean water.

Adaptable to all configurations, even in the most difficult to access places, these new SFA references will make it easy to carry out any project involving watering supplies, fountain installation, pool drainage or even the evacuation of uncharged water.

A complete offer, based on 5 main ranges, accompanied by accessories for all needs

SFA designed this new "Eaux Claires" offering based on advanced technology, ensuring optimized water management. Thus, while these new SFA products, suitable for both individuals and professionals, combine increased performance with reduced electricity consumption, they also actively contribute to better management of water resources.

This complete SFA range is made up of 27 references accompanied by multiple accessories. The program includes surface pumps, horizontal multi-cell surface pumps, domestic pressure boosters, rainwater managers, but also multi-cell submersible pumps for a multitude of uses: watering, domestic supply for toilet flushing or washing machines, supply of decorative fountains, washing (terrace, car, interior floors, facades or even roofs), emptying of swimming pools, pumping of water (rain, well, river or pond), or even transfer of water into a tank.

Intended to improve the recovery, management and reuse of clear water, we should also point out that this new range of SFA responses fits ideally into the regulatory framework for rainwater management.

A regulatory framework that is evolving on the uses of non-potable water

Faced with climate change and the challenges of moderation in use, availability and quality of water resources, France has adopted a plan promoting resilient and concerted water management. It should be remembered that this plan is governed by the decree of July 12, 2024 (decree no. 2024-796) concerning the use of non-potable water for domestic purposes and extends in particular the possibility of using gray water and water from collective swimming pools for domestic purposes upon simple declaration. The regulatory framework thus applies in buildings, places open to the public, establishments receiving the public, workplaces, collective residential buildings and in individual houses, whether in the interior and/or exterior parts.

Domestic uses affected by water unfit for human consumption range from washing indoor floors, washing clothes, supplying decorative fountains to disposing of excreta, cleaning outdoor surfaces - including washing vehicles when carried out exclusively at home - to watering vegetable gardens, watering green spaces on the scale of buildings, including green roofs and walls, to filling ornamental ponds.

(Source: Ministry of Labor, Health, Solidarity and Families)

Sanijet high-performance surface pumps, ideal for rainwater reuse

Optimized thanks to a venturi system (Jet) for increased suction, the 5 Sanijet pumps are self-priming for simplified start-up. It should also be noted that they have a suction capacity of up to 8 meters, unlike conventional surface pumps which are often limited to 7 meters, and that their flow rate ranges from 3,6 to 5 m³/h for HMT – total manometric heights of 50 to 55 meters. These Sanijet stainless steel centrifugal pumps are transportable or not depending on the model.

For pumping tanks or shallow wells, or supplying water to service buildings, the Sanijet 4-50 surface jet pump, with a flow rate of 3,6 m³/h and a maximum manometric height of 50 m, is sold at the recommended retail price of €330 including tax.

SaniMHP horizontal multistage centrifugal pumps, for versatile use

Ideal for irrigation, rainwater harvesting, and water supply, this range of 8 quiet, high-performance pumps also allows suction up to 8 meters. While the SaniMHP pumps boast versatile use, they are also self-priming and available in an automatic version for on-demand operation. With TDHs ranging from 40 to 52 meters, the SaniMHP pumps offer flow rates of 4 to 8,7 m³/ h.

Ideal for watering, the SaniMHP 4-40, with a flow rate of 4 m³/h and maximum manometric height of 40 m is marketed from €577 including tax.

Saniboost: domestic pressure boosters for an optimized and smooth water supply

With 5 references available, these domestic booster pumps increase and regulate the water pressure collected in a tank. These solutions are therefore ideal for low flow consumption for guaranteed start-up pressure on drip systems, for example, or automatic flushing mechanisms. Equipped with a buffer tank limiting frequent starts and stops, the Saniboost booster pumps extend the lifespan of the device and reduce noise pollution. Saniboost booster pumps boast HMTs of 40 to 56 meters for respective flow rates of 3,6 to 5,2 m³/h and suction heights of 4 to 8 meters.

The Saniboost Smart (left) and Saniboost MHP 4-40 B (right) pressure booster units are respectively marketed at the recommended retail prices of €1 and €060 including VAT.

Sanirain automated rainwater management system, an efficient and safe non-potable water supply

These two Sanirain references allow non-potable water to be supplied to installations such as toilet flushes, washing machines or even water points for watering or cleaning floors. Thanks to their ease of installation and automated operation, the Sanirain systems not only ensure optimal rainwater management, but also a complete disconnection between the drinking water network and the non-potable water network, to comply with health standards (EN 1717). Thus, in the event of an empty supply tank, the system automatically switches to the drinking water network, guaranteeing continuity of service. With HMTs of 40 and 50 meters for flow rates of 4 and 5,2 m³/h, the Sanirain have suction heights of 8 meters.

Here, the Sanirain 4, with a flow rate of 4 m³/h and 40 m HMT, an ideal solution for efficiently managing rainwater for non-potable water supply or small irrigation systems. Recommended retail price: €2.590 euros including VAT.

Saniwell multi-stage submersible pumps, tailor-made water supplies

Ideal for ensuring high pressure and a regular, efficient supply, even in difficult conditions, the 7 Saniwell submersible pump models are used, depending on the model, in a wide range of applications, such as boreholes, wells, or even tanks and cisterns. Robust and efficient, the Saniwell pumps have HMTs ranging from 50 to 68 meters, for flow rates from 3,1 to 5,7 m³/h and immersion depths of 15 to 25 meters.

The Saniwell 4-50 IPC-F multi-stage submersible pump, flow rate of 5,5 m³/h for a maximum HMT of 50 meters, equipped with a floating strainer ensuring suction between two waters. Ideal in a tank or a well, it is sold at the recommended retail price of €825 including VAT.

An SFA "Eaux Claires" offer which is complemented by accessories

The new "Eaux Claires" offer from SFA is complemented by a wide range of accessories: pressure switches, tanks, pressure gauges and even connectors are all useful additions to the industrial sector's solutions.

It should be noted that pressure switches guarantee automatic and reliable management for both pressure booster units and automatic pumps. Available in several versions (PC1 to PC6, from 8 to 10 bars maximum pressure, from 10 to 16 A), they adapt perfectly to various needs while avoiding water hammer and providing protection for installations in the event of water shortages or rapid cycles, real guarantees of optimal longevity.

In the same vein of an exhaustive offer promoting performance and reliability, let us specify that SFA markets 6 references of tanks (steel, stainless steel or coated with Epoxy^®) with capacities of 20 to 60 liters, all supplied with 5-way connectors and hose, but also two pressure gauges from 0 to 6 bars and 3-piece M/F 1'' or 5-way brass 1'' threaded connectors.

Article SFA deploys a new comprehensive range of solutions dedicated to the recovery, management and reuse of clear water first appeared on building press.